Epoxy Flooring Fillmore, CA
Free estimates on garage floors, patios, driveways and storage or studio slabs across ZIP 93015, with every price listed on this page and a limited lifetime adhesion warranty.
★★★★★ 5-Star Rated on Google · Limited lifetime adhesion warranty
Free On-Site Estimate
How much does epoxy flooring cost in Fillmore?
A Fillmore two-car garage of up to 400 sq ft costs $2,600-$4,000 for a flake epoxy floor at $6.50-$10 per sq ft, installed in one day. That is the entry price, since every project starts at $2,600. Solid color, metallic and quartz systems cost more, and each floor carries a limited lifetime adhesion warranty.
Fillmore is an incorporated city in the Santa Clara River Valley, so the City of Fillmore website is the official place for planning and permit questions. The 2020 census counted 16,419 residents, and ZIP 93015 stretches well past the city limits into citrus and avocado country.
That mix of old packinghouse streets and newer tracts is why one visit can cover more than a garage. Anyone pricing epoxy flooring in Fillmore can have the patio, the driveway and a back-lot storage room measured during the same visit as the garage, so an epoxy garage floor Fillmore quote can grow into a whole-property plan.
Fillmore ZIP codes and the neighborhoods we coat in
Street addresses in Fillmore use ZIP 93015, while 93016 is a post-office-box ZIP enclosed within it. Of 5,259 homes in the city, 3,950 are single-family detached houses, the median home was built in 1978, and 3,540 of 5,173 occupied homes are owner-occupied (ACS 2020-2024).
| Place | ZIP | Where it sits |
|---|---|---|
| Historic downtown | 93015 | Central Avenue, with turn-of-the-century buildings and the Fillmore Towne Theatre |
| North Fillmore | 93015 | Around Fillmore High School on Central Avenue |
| Heritage Valley | 93015 | Newer single-family housing in the west of the city |
| Old packinghouse district | 93015 | Sespe Avenue and A Street, where a citrus packinghouse opened in 1899 |
| Bardsdale | 93015 | Citrus community about 3 miles away, across the Santa Clara River |
| Sespe Village | 93015 | Rural area west of town |
Neighborhood names come from Wikipedia, the Fillmore Historical Museum and public maps, and ZIP codes from Wikipedia and zip-codes.com. If your street is missing, phone us and we will confirm it.
Garages, patios, driveways and storage rooms in a citrus-packing town
Three of every four Fillmore homes are single-family detached houses, so the house garage is the usual starting point. A two-car garage of up to 400 sq ft takes a flake epoxy floor for $2,600-$4,000 and one day on site, and the same visit can price everything else on the lot.
Fillmore grew up around citrus. The Fillmore Historical Museum records that a citrus association built a packinghouse at Sespe Avenue and A Street in 1899, that only one citrus packinghouse still operates, and that the rest became avocado packinghouses, artist studios and storage. Studio, storeroom and small-shop floors in town are quoted after a free site visit through our commercial epoxy flooring service, never from a guessed number.
Patios, walkways and driveways fall under outdoor concrete coatings at $8-$12 per sq ft. A driveway coating needs grinding and crack treatment before its UV-stable topcoat, a patio coating gets texture for grip, and pool deck coating follows the same sequence with attention to drainage.
A bare garage or workshop that only needs sealing can take grind and seal at $6.50-$9 per sq ft, a plain form of concrete resurfacing with no color flake. Our garage floor epoxy page explains which finish suits which use.
Heat, rain and a 1994 earthquake: what shapes a Fillmore slab
Fillmore sits inland in the Santa Clara River Valley at about 456 feet, with a warm-summer Mediterranean climate. Mean daily highs run from about 69 F in winter to 83 F in August, summers can top 100 F, and the city gets roughly 17.4 inches of rain a year, mostly from November to March. Those figures come from Wikipedia, because we found no weather station inside the city.
That heat argues for a UV-stable polyaspartic topcoat on any slab that sees daylight, and for a pigmented polyaspartic basecoat on dry concrete in full sun. Before the wet season returns we also test the slab itself, since a damp floor needs a different basecoat than a dry one.
Fillmore remembers the January 17, 1994 Northridge earthquake, which made it the hardest-hit community in Ventura County, with more than 200 buildings damaged. We do not know the history of your slab, so every crack and joint gets the same treatment: mark it, repair it, and use flexible filler where the concrete may still move.
Ventura County's air district sets its own limit. Under Rule 74.2, floor coatings are capped at 100 grams per liter of volatile organic compounds, tightening to 50 grams per liter from July 1, 2021, and we specify systems that stay inside it.
Permits are the city's call. The Planning Department links an online portal for applications, and we do not assume a coating job needs one, so ask the city first if you want to be certain.
Epoxy garage floor Fillmore prices, by system and by time on site
Epoxy flooring cost in Fillmore depends on the system and the square footage, and every Fillmore project starts at $2,600. The two-car ranges assume up to 400 sq ft, while larger garages, studios and outdoor slabs are priced per sq ft once we have measured.
| System | Per sq ft | Typical 2-car garage | Install time |
|---|---|---|---|
| Flake epoxy | $6.50-$10 per sq ft | $2,600-$4,000 | 1 day |
| Solid color epoxy | $9.50-$11.50 per sq ft | $3,800-$4,600 | 3 days |
| Metallic epoxy | $12.50-$18.50 per sq ft | $5,000-$7,400 | 3-4 days |
| Quartz & sand finish | $9-$16.50 per sq ft | $3,600-$6,600 | 2-3 days |
| Grind and seal | $6.50-$9 per sq ft | $2,600-$3,600 | 1-2 days |
| Patio, driveway & pool deck coating | $8-$12 per sq ft | $3,200-$4,800 | 1-2 days |
Flake, solid color, metallic or quartz for a 1978-era Fillmore garage
The median Fillmore home dates from 1978, and about 54 percent of the city's homes predate 1980, so many garage slabs are decades old. Older concrete tends to show hairline cracks, oil stains and patched areas, which is where flake earns its place: the broadcast hides blemishes and adds grip. Pick a blend in the color chart and we build the layers beneath it.
A garage that doubles as a showpiece suits metallic epoxy at $12.50-$18.50 per sq ft over three to four days. Solid color epoxy gives a clean, uniform look in three days, and quartz and sand finishes add traction in two to three days.
The slab picks the basecoat. Concrete that holds moisture gets a pigmented moisture-barrier epoxy, and dry concrete in the sun can take pigmented polyaspartic. A UV-stable polyaspartic topcoat finishes both, because polyaspartic resists the yellowing that plain epoxy can show, which matters for any garage floor coating that faces a 100-degree afternoon.
Weighing a hardware-store kit instead? The DIY kit vs professional comparison shows where kits fall short, and the Thousand Oaks cost guide explains what moves a quote up or down.
Eight steps for a flake floor in a Fillmore garage
These steps describe a flake floor. Solid color, metallic and quartz systems follow their own schedules.
- Walk-through We look over the slab, mark cracks, stains and old patches, and measure every square foot so the quote is firm.
- Moisture reading A calcium chloride test or an in-slab humidity probe shows what the concrete is holding, and the coating maker's limits steer the basecoat choice.
- Diamond grinding Grinders with dust extraction remove old sealers and open the surface into a bonding profile the basecoat can grip.
- Repairs Chips and spalls get rigid repair material, while joints and cracks that may still move get flexible filler.
- Pigmented basecoat Damp-prone slabs receive a pigmented moisture-barrier epoxy, and dry slabs facing hot afternoons can take pigmented polyaspartic.
- Flake broadcast Flakes are thrown by hand into the wet basecoat until it rejects any more, so no bare patch shows through.
- Scrape and sweep Once the layer cures, loose flakes are scraped and vacuumed away, giving the topcoat an even texture.
- UV-stable topcoat Polyaspartic seals the flakes and resists hot-tire pickup, and we give walk-on and drive-on timing from the product's cure data.
Floors photographed in Fillmore and the valley around it
Flake, metallic, solid color and outdoor floors, tagged in Fillmore and in communities nearby. Tap any photo to enlarge it.
Thousand Oaks Epoxy Floors, at your Fillmore door by appointment
We are a service-area business, which means we install in Fillmore and bring the estimate to you. The slab is measured at the free on-site estimate, so the quote reflects the concrete you actually have instead of a guess from a photo.
Our phone, (805) 521-6591, is staffed Monday to Thursday from 8 am to 5 pm, on Friday until 4 pm, and on Sunday from 8 am to 5 pm. Saturday is closed. You can also request an estimate online through our Google listing, where we are 5-Star Rated on Google.
Every floor we install carries a limited lifetime adhesion warranty. Read more about the company, or send your details through the contact page and we will call you back to set a time.
Fillmore epoxy flooring questions, answered
Epoxy garage floor Fillmore pricing: what does a two-car garage cost?
A two-car flake garage in Fillmore, up to 400 sq ft, costs $2,600-$4,000 and installs in one day. Solid color runs $3,800-$4,600 over three days, metallic $5,000-$7,400 over three to four days, and quartz $3,600-$6,600 over two to three days. No Fillmore project starts below $2,600.
How much does it cost to epoxy a 20x20 garage in Fillmore?
A 20x20 garage measures 400 sq ft, which puts a Fillmore flake floor at $2,600-$4,000 for the whole job, or $6.50-$10 per sq ft. Solid color, metallic and quartz use their own per-sq-ft rates, and the free on-site measurement confirms the final number.
What would a 500 sq ft or 1,500 sq ft floor cost?
Anything over 400 sq ft is priced per sq ft after we measure it. The per-sq-ft rates are $6.50-$10 for flake, $6.50-$9 for grind and seal, $9.50-$11.50 for solid color, $12.50-$18.50 for metallic and $9-$16.50 for quartz. Large studio and storage floors in Fillmore are quoted after a free site visit, never with a guessed number.
Is there a downside to an epoxy floor in a Fillmore garage?
Epoxy demands real preparation, can feel slick when wet unless a grit additive is used, and fails over a slab that holds untested moisture. Hot tires can lift a thin coat. Grinding, a moisture reading and a UV-stable polyaspartic topcoat answer most of this, which matters in Fillmore summers.
Is coating a garage floor worth it?
Yes, when the prep is done properly. A ground, tested and repaired slab with a polyaspartic topcoat gives a Fillmore garage a sealed floor that wipes clean and handles tools, heat and tires, backed by a limited lifetime adhesion warranty. A quick coat over an unprepared floor is not worth the money.
Can mold grow under an epoxy floor?
Mold needs lasting moisture, so the risk comes from a wet slab rather than the coating. We test the concrete before coating, and the result decides between a moisture-barrier epoxy basecoat and pigmented polyaspartic. A floor installed over a tested, dry slab leaves nothing for mold to feed on.
Polyurea or epoxy: which suits a Fillmore garage better?
We use both. Epoxy forms a strong, well-bonded basecoat, while polyaspartic, a type of polyurea, resists sun yellowing and hot-tire marks on top. Fillmore garages that see afternoon sun gain the most from that pairing. The epoxy vs polyaspartic comparison covers the details.
How long will a garage epoxy floor last?
A properly prepared floor with a polyaspartic topcoat is built to last for many years of daily use, and it is covered by our limited lifetime adhesion warranty against the coating letting go of the concrete. Wear depends on traffic, tires and prep, so the lifespan guide explains what to expect.
Do you coat storage rooms and studio floors in Fillmore?
Yes. Storerooms, studios and small shops are coated with the same sequence as a garage: grind, repair, test and coat. Because area, prep and downtime change every quote, these commercial floors are priced after a free site visit and never with a number we cannot back up.
Who decides whether a Fillmore coating job needs a permit?
The City of Fillmore does. Its Planning Department runs an online portal for applications, and the city pages we read do not say whether a floor coating needs a permit. We never assume one is required, so contact the city before you book if you want certainty.
Towns close to Fillmore that we also coat
Looking for epoxy flooring near me? These locations are closest to Fillmore, measured in straight lines: Moorpark about 9 miles, Somis about 10, Simi Valley about 13, Camarillo about 14 and Thousand Oaks about 15.
More reading for Fillmore floors
The epoxy flooring guide gathers our longer answers, how long a garage floor lasts covers wear, and why floors peel from hot tires explains the usual failure. The Moorpark page describes the nearest city we serve, and the service areas overview lists every place we cover.