Los Angeles County · 91302

Epoxy Flooring Hidden Hills, CA

Epoxy flooring in Hidden Hills is priced per square foot because most projects are bigger than a two-car garage: flake runs $6.50–$10, solid color $9.50–$11.50 and metallic $12.50–$18.50 per sq ft. A 1,000 sq ft multi-car garage in flake is roughly $6,500–$10,000 before any extra prep.

Hidden Hills is a small gated city east of Calabasas, about 13 miles from our office. Typical drive from our office at 3075 E Thousand Oaks Blvd #1100: 20 minutes. Call (805) 521-6591 for a free on-site estimate.

What Makes Hidden Hills Floors Different?

Hidden Hills is a small gated city of large lots, and our projects there are rarely a standard two-car garage. Four- and five-car garages, detached guest-house garages, barns with wash racks, and covered areas next to riding arenas are more typical. Because of that, the two-car figures elsewhere on this site are not much help; per-square-foot pricing is.

Everything goes through the gate. Contractor access has to be arranged by the homeowner, for the estimate visit and for every work day. Larger jobs may span two or three days even in flake, so we lay out the schedule in advance.

Barns and wash areas stay wet. We use quartz or flake with coarse grit there and slope-aware detailing around drains.

Hidden Hills properties are mostly large estate lots with multi-car garages, barns, sport courts and long driveways, so projects are often larger than a standard two-car garage.

All work in Hidden Hills goes through gate access; plan ahead so contractor access is approved before the install date.

Two-car garage with a new epoxy flake floor near Thousand Oaks
Epoxy flooring Thousand Oaks two-car garage
2026 installed prices

What Does Epoxy Flooring Cost in Hidden Hills?

Installed prices, 2026. Typical two-car garage = up to 400 sq ft. Every project starts at $2,600. Final price after a free on-site measurement.
SystemPer sq ftTypical 2-car garageInstall time
Flake epoxy$6.50–$10 per sq ft$2,600–$4,0001 day
Solid color epoxy$9.50–$11.50 per sq ft$3,800–$4,6003 days
Metallic epoxy$12.50–$18.50 per sq ft$5,000–$7,4003–4 days
Quartz & sand finish$9–$16.50 per sq ft$3,600–$6,6002–3 days
Grind and seal$6.50–$9 per sq ft$2,600–$3,6001–2 days
Patio, driveway & pool deck coating$8–$12 per sq ft$3,200–$4,8001–2 days

Flake garage floor cost by garage size in Hidden Hills

Garage sizeApprox. areaFlake, installed
1-car250 sq ft$2,600–$2,600
2-car400 sq ft$2,600–$4,000
2.5-car500 sq ft$3,250–$5,000
3-car650 sq ft$4,225–$6,500

Flake at $6.50–$10 per sq ft with the $2,600 project minimum. Extra prep (coating or glue removal, advanced crack repair, demo, moisture mitigation, extra labor) is added after we see the slab.

Which Hidden Hills Neighborhoods and Zip Codes Do You Cover?

NeighborhoodZipWhat we usually find
Round Meadow / Long Valley area91302Estate garages, 4–6 cars
Spring Valley Rd area91302Barns and wash racks
Equestrian lots91302Tack rooms, arena-side covered areas
Sport courts / pool areas91302Outdoor UV-stable systems
Guest houses91302Secondary garages and studios

Plus every other street in 91302. No travel charge.

Which Coating Is Best for a Hidden Hills Garage?

Estate garages: 4-layer flake in a large-chip blend reads well across a wide floor. Barns: quartz with 30-grit. Showroom garages: metallic or high-gloss solid.

About 20 minutes from our office. Please arrange gate access for both the estimate and install dates.

Before you get quotes, these may help: 2026 epoxy garage floor price guide · epoxy vs polyaspartic · 10 questions to ask an installer.

Why Do Flake Floors in Hidden Hills Range From $2,600 to $4,000?

Hidden Hills projects are often larger than a two-car garage, so use the per-square-foot figures for each tier below as your guide.

A flake epoxy garage floor in Hidden Hills costs $6.50–$10 per sq ft, or $2,600–$4,000 for a typical two-car garage (up to 400 sq ft). A 3-layer system sits at the low end, a 4-layer double-topcoat build in the middle, and a 5-layer system with its own moisture barrier at the top.

3-layer: standard system

From $6.50 per sq ft
Typical two-car garage: From $2,600

Low end of the range

  • Pigmented basecoat matched to your slab: moisture-vapor-barrier (MVB) epoxy where the concrete needs moisture protection, or pigmented polyaspartic where UV exposure matters more
  • Flake broadcast to full rejection for a dense, even texture
  • UV-stable, hot-tire-safe polyaspartic topcoat

Best for: Most everyday garages; installed in one day, walkable that evening.

4-layer: double-topcoat flake system

$6.50–$10 per sq ft, mid-range
Typical two-car garage: Between $2,600 and $4,000

Middle of the range

  • Everything in the 3-layer build, including the slab-matched basecoat
  • A second topcoat: urethane for gloss or polyaspartic for a matte look
  • Optional sanding between coats for a smoother feel underfoot
  • Optional slip-resistant grit: 240 (fine), 80, or 30 (most grip)

Best for: Owners who want a smoother surface, a specific sheen, or extra grip.

5-layer: maximum-build flake system

Up to $10 per sq ft
Typical two-car garage: Up to $4,000

Top of the range

  • A dedicated clear moisture vapor barrier as its own first layer
  • Pigmented polyaspartic basecoat
  • Flake broadcast to full rejection
  • Polyaspartic topcoat
  • Final coat of urethane gloss or matte polyaspartic, with optional sanding and aluminum-oxide grit (240 / 80 / 30)

Best for: Slabs with moisture concerns and owners who want the thickest, most protected build.

What moves your price

In Hidden Hills, site work adds to the per-foot tier price, so even a 3- or 4-layer floor can run about $4,000 on a two-car-size area. We confirm what applies at the free on-site estimate.

  • Removal of an existing coating
  • Adhesive removal
  • Advanced crack repairs
  • Demo of an existing floor
  • Moisture mitigation
  • Added labor and prep on larger or detailed spaces

The spread is not a sales trick: every tier is a complete, diamond-ground floor. What changes is how many coats go down and what each coat does, so the $2,600 floor is a real finished system, and on an otherwise ready slab the $4,000 floor buys extra layers, not a markup.

Final price depends on measured square footage and slab condition; confirmed at your free on-site estimate.

How Does Install Day Work?

  1. Diamond grinding — opens the slab to a bonding profile; we never acid-etch.
  2. Cleaning — HEPA vacuum to remove all grinding dust.
  3. Repairs — cracks, pits and spalls filled and ground flush.
  4. Vertical coating — stem walls coated a few inches up for a clean edge.
  5. Basecoat — pigmented epoxy basecoat, moisture-tolerant where slab readings require it.
  6. Broadcast — flake, quartz or sand broadcast to rejection (or a metallic pour).
  7. Scrape & vacuum — loose chips removed for a smooth surface.
  8. Topcoat — UV-stable polyaspartic topcoat rated for hot tires.

Hidden Hills Epoxy Flooring FAQ

How much does epoxy flooring cost in Hidden Hills?

Epoxy flooring in Hidden Hills is priced per square foot because most projects are bigger than a two-car garage: flake runs $6.50–$10, solid color $9.50–$11.50 and metallic $12.50–$18.50 per sq ft. A 1,000 sq ft multi-car garage in flake is roughly $6,500–$10,000 before any extra prep.

How is a 1,000 sq ft Hidden Hills garage priced?

Per square foot. In flake that is about $6,500–$10,000 at $6.50–$10 per sq ft, before any coating removal, crack repair or moisture work found on site.

Can you coat a barn wash rack?

Yes, with a quartz or flake broadcast and coarse grit in the topcoat for traction. We detail around drains so water still runs off.

How many days does a large Hidden Hills project take?

A large flake garage may take 2 days; solid color about 3 and metallic 3–4. We confirm after measuring.

Do you coat large multi-car garages and barns in Hidden Hills?

Yes. Larger spaces are priced per square foot after an on-site measurement; the per-square-foot ranges on this page apply.

How do you handle gate access in Hidden Hills?

We follow the city gate procedures; please arrange contractor access for the estimate and install dates.

Why does flake epoxy pricing range from $2,600 to $4,000?

The range reflects how many layers go into the floor. A standard 3-layer flake system starts at $6.50 per sq ft ($2,600 for a typical two-car garage). Adding a second topcoat (4 layers) or a dedicated clear moisture barrier plus a final coat (5 layers) adds material and labor, which moves the price up to $10 per sq ft ($4,000 for a two-car garage). You pick the build; the low end is a complete floor, not a teaser price.

Can a 3-layer flake floor cost $4,000?

Yes. The layer count sets the starting price, but site conditions also count. A 3-layer or 4-layer flake floor can reach about $4,000 when the job needs extra work such as removing an existing coating, glue or adhesive removal, advanced crack repair, demolition of an existing floor, moisture mitigation, or extra labor and prep. We confirm what your slab needs at the free on-site estimate.

Get a Real Number for Your Floor

Free on-site estimate anywhere in Thousand Oaks and the Conejo Valley.