Epoxy flooring in Camarillo runs $6.50–$18.50 per sq ft installed. A one-day flake garage floor costs $2,600–$4,000 for a two-car garage; commercial floors in the business parks are quoted after a site visit. Coastal moisture is the main price driver here, along with coating removal and crack repair.
Camarillo is west of Thousand Oaks down the Conejo Grade, about 12 miles on the 101. Typical drive from our office at 3075 E Thousand Oaks Blvd #1100: 15–20 minutes. Call (805) 521-6591 for a free on-site estimate.
Camarillo is the closest city on our list to the ocean, and that shows up in the concrete. Mornings in Pleasant Valley and Old Town are often damp under the marine layer, and older slabs without a vapor barrier can push moisture up into a coating. We meter every slab. When readings are high, the 5-layer flake build with its own clear moisture barrier is the one we suggest.
The residential side ranges from 1960s–70s homes around Old Town and Leisure Village to newer Mission Oaks and Spanish Hills homes with large garages. On the commercial side, the business parks near Camarillo Airport and along Lewis Road have showrooms, warehouses and light-industrial units that need durable, easy-clean floors installed without shutting down for a week.
Coming down the Conejo Grade, Camarillo is about 15–20 minutes from our office.
Camarillo mixes 1960s–70s homes, newer Mission Oaks and Spanish Hills homes, and a large business-park area near the airport with light-industrial and warehouse floors.
Camarillo is closer to the ocean, with cooler, moister air; we check slab moisture and use a moisture-tolerant epoxy primer when readings call for it.
| Neighborhood | Zip | What we usually find |
|---|---|---|
| Mission Oaks | 93012 | Newer homes; large garages |
| Spanish Hills | 93012 | Estate homes; showroom garages |
| Leisure Village | 93012 | 55+ community; smaller garages and patios |
| Old Town Camarillo | 93010 | Older slabs, marine-layer moisture |
| Airport / Lewis Rd business parks | 93010 / 93012 | Warehouse, showroom and light-industrial floors |
Plus every other street in 93010, 93012. No travel charge.
| System | Per sq ft | Typical 2-car garage | Install time |
|---|---|---|---|
| Flake epoxy | $6.50–$10 per sq ft | $2,600–$4,000 | 1 day |
| Solid color epoxy | $9.50–$11.50 per sq ft | $3,800–$4,600 | 3 days |
| Metallic epoxy | $12.50–$18.50 per sq ft | $5,000–$7,400 | 3–4 days |
| Quartz & sand finish | $9–$16.50 per sq ft | $3,600–$6,600 | 2–3 days |
| Grind and seal | $6.50–$9 per sq ft | $2,600–$3,600 | 1–2 days |
| Patio, driveway & pool deck coating | $8–$12 per sq ft | $3,200–$4,800 | 1–2 days |
| Garage size | Approx. area | Flake, installed |
|---|---|---|
| 1-car | 250 sq ft | $2,600–$2,600 |
| 2-car | 400 sq ft | $2,600–$4,000 |
| 2.5-car | 500 sq ft | $3,250–$5,000 |
| 3-car | 650 sq ft | $4,225–$6,500 |
Flake at $6.50–$10 per sq ft with the $2,600 project minimum. Extra prep (coating or glue removal, advanced crack repair, demo, moisture mitigation, extra labor) is added after we see the slab.
Camarillo sits closer to the coast, where slab moisture can matter, so the 5-layer build with its own moisture barrier is often worth a look. All three tiers:
A flake epoxy garage floor in Camarillo costs $6.50–$10 per sq ft, or $2,600–$4,000 for a typical two-car garage (up to 400 sq ft). A 3-layer system sits at the low end, a 4-layer double-topcoat build in the middle, and a 5-layer system with its own moisture barrier at the top.
From $6.50 per sq ft
Typical two-car garage: From $2,600
Low end of the range
Best for: Most everyday garages; installed in one day, walkable that evening.
$6.50–$10 per sq ft, mid-range
Typical two-car garage: Between $2,600 and $4,000
Middle of the range
Best for: Owners who want a smoother surface, a specific sheen, or extra grip.
Up to $10 per sq ft
Typical two-car garage: Up to $4,000
Top of the range
Best for: Slabs with moisture concerns and owners who want the thickest, most protected build.
Near the coast, Camarillo slab conditions often decide the final price: a 3- or 4-layer build can still reach about $4,000. We confirm what applies at the free on-site estimate.
The spread is not a sales trick: every tier is a complete, diamond-ground floor. What changes is how many coats go down and what each coat does, so the $2,600 floor is a real finished system, and on an otherwise ready slab the $4,000 floor buys extra layers, not a markup.
Final price depends on measured square footage and slab condition; confirmed at your free on-site estimate.
Homes near the coast: moisture first. If the slab tests damp, the 5-layer flake with a dedicated vapor barrier. Business parks: solid color or quartz with a chemical-resistant topcoat, scheduled nights or weekends.
We can work evenings and weekends on commercial units so you do not lose business days.
Before you get quotes, these may help: 2026 epoxy garage floor price guide · epoxy vs polyaspartic · 10 questions to ask an installer.
Epoxy flooring in Camarillo runs $6.50–$18.50 per sq ft installed. A one-day flake garage floor costs $2,600–$4,000 for a two-car garage; commercial floors in the business parks are quoted after a site visit. Coastal moisture is the main price driver here, along with coating removal and crack repair.
It can. Damp slabs push vapor into coatings and cause bubbling or peeling. We test moisture on every slab and use a moisture-tolerant primer or the 5-layer build with a dedicated vapor barrier when readings call for it.
Yes. Showrooms, warehouses and light-industrial units in the business parks are quoted per job after a free site visit, and we can work nights or weekends.
No. Every project starts at $2,600, so a small garage or patio is priced at that minimum unless the area is larger.
Yes. We coat light-industrial units, warehouses and showrooms in the Camarillo business parks, including nights and weekends to avoid downtime.
No. Camarillo is inside our standard service area.
The range reflects how many layers go into the floor. A standard 3-layer flake system starts at $6.50 per sq ft ($2,600 for a typical two-car garage). Adding a second topcoat (4 layers) or a dedicated clear moisture barrier plus a final coat (5 layers) adds material and labor, which moves the price up to $10 per sq ft ($4,000 for a two-car garage). You pick the build; the low end is a complete floor, not a teaser price.
Yes. The layer count sets the starting price, but site conditions also count. A 3-layer or 4-layer flake floor can reach about $4,000 when the job needs extra work such as removing an existing coating, glue or adhesive removal, advanced crack repair, demolition of an existing floor, moisture mitigation, or extra labor and prep. We confirm what your slab needs at the free on-site estimate.
Free on-site estimate anywhere in Thousand Oaks and the Conejo Valley.
