Epoxy flooring in Somis costs $6.50–$10 per sq ft for flake and $9–$16.50 for quartz, with garages starting at $2,600. Shops, barns and equipment bays usually need deeper grinding, oil removal and crack repair first, which is quoted as prep on top of the system price after we see the slab.
Somis is a rural community between Camarillo and Moorpark, about 12 miles from our office. Typical drive from our office at 3075 E Thousand Oaks Blvd #1100: 20 minutes. Call (805) 521-6591 for a free on-site estimate.
Somis is ranch and orchard country between Camarillo and Moorpark along Highway 118, and most of our work there is not a tract-home garage. It is the shop where the tractor gets serviced, the equipment bay off Bradley Road, a barn aisle, or a detached garage that has been collecting avocado-season dust for twenty years.
Those slabs take abuse: hydraulic fluid, diesel, fertilizer and lots of fine dirt. Before we coat, oil-soaked areas are degreased and ground out, and broken edges are rebuilt. On shops we usually recommend a chemical-resistant topcoat and grit so the floor is not slick when something spills.
Many Somis properties are on wells and have older electrical in outbuildings. We check power at the estimate and bring a generator if needed.
Somis is mostly ranch and agricultural property, so we see shops, barns, equipment bays and detached garages more than tract-home garages.
Shops and barns often have dusty, uneven or oil-soaked slabs; we grind deeper and repair before coating, and suggest quartz or flake for grip.
Shops and equipment bays: quartz or flake with 80- or 30-grit and a chemical-resistant topcoat. Ranch-home garage: 3- or 4-layer flake.
About 20 minutes from our office via the 101 and Lewis Road or Hwy 118. Larger shops are scheduled over 2–3 days.
Before you get quotes, these may help: 2026 epoxy garage floor price guide · epoxy vs polyaspartic · 10 questions to ask an installer.
| System | Per sq ft | Typical 2-car garage | Install time |
|---|---|---|---|
| Flake epoxy | $6.50–$10 per sq ft | $2,600–$4,000 | 1 day |
| Solid color epoxy | $9.50–$11.50 per sq ft | $3,800–$4,600 | 3 days |
| Metallic epoxy | $12.50–$18.50 per sq ft | $5,000–$7,400 | 3–4 days |
| Quartz & sand finish | $9–$16.50 per sq ft | $3,600–$6,600 | 2–3 days |
| Grind and seal | $6.50–$9 per sq ft | $2,600–$3,600 | 1–2 days |
| Patio, driveway & pool deck coating | $8–$12 per sq ft | $3,200–$4,800 | 1–2 days |
| Garage size | Approx. area | Flake, installed |
|---|---|---|
| 1-car | 250 sq ft | $2,600–$2,600 |
| 2-car | 400 sq ft | $2,600–$4,000 |
| 2.5-car | 500 sq ft | $3,250–$5,000 |
| 3-car | 650 sq ft | $4,225–$6,500 |
Flake at $6.50–$10 per sq ft with the $2,600 project minimum. Extra prep (coating or glue removal, advanced crack repair, demo, moisture mitigation, extra labor) is added after we see the slab.
For Somis shops, barns and equipment bays, the extra grip and moisture options in the upper tiers can be worth it. Here is the comparison:
A flake epoxy garage floor in Somis costs $6.50–$10 per sq ft, or $2,600–$4,000 for a typical two-car garage (up to 400 sq ft). A 3-layer system sits at the low end, a 4-layer double-topcoat build in the middle, and a 5-layer system with its own moisture barrier at the top.
From $6.50 per sq ft
Typical two-car garage: From $2,600
Low end of the range
Best for: Most everyday garages; installed in one day, walkable that evening.
$6.50–$10 per sq ft, mid-range
Typical two-car garage: Between $2,600 and $4,000
Middle of the range
Best for: Owners who want a smoother surface, a specific sheen, or extra grip.
Up to $10 per sq ft
Typical two-car garage: Up to $4,000
Top of the range
Best for: Slabs with moisture concerns and owners who want the thickest, most protected build.
For Somis shops and barns, the slab often matters as much as the layers: a 3- or 4-layer build can reach about $4,000. We confirm what applies at the free on-site estimate.
The spread is not a sales trick: every tier is a complete, diamond-ground floor. What changes is how many coats go down and what each coat does, so the $2,600 floor is a real finished system, and on an otherwise ready slab the $4,000 floor buys extra layers, not a markup.
Final price depends on measured square footage and slab condition; confirmed at your free on-site estimate.
| Neighborhood | Zip | What we usually find |
|---|---|---|
| Bradley Rd area | 93066 | Equipment bays, shops |
| Somis Rd / Hwy 118 corridor | 93066 | Barns, detached garages |
| La Loma / Las Posas Valley | 93066 | Ranch homes, orchard outbuildings |
| Ranch estates | 93066 | Large garages and workshops |
| Packing / ag buildings | 93066 | Commercial, quoted per job |
Plus every other street in 93066. No travel charge.
Epoxy flooring in Somis costs $6.50–$10 per sq ft for flake and $9–$16.50 for quartz, with garages starting at $2,600. Shops, barns and equipment bays usually need deeper grinding, oil removal and crack repair first, which is quoted as prep on top of the system price after we see the slab.
A diamond-ground system with a chemical-resistant polyaspartic topcoat resists common shop fluids. Wipe spills promptly; long soaks of strong solvents can still mark any coating.
Usually. We degrease and grind out contaminated areas and patch where needed. Heavily soaked concrete takes extra prep labor, which is quoted separately.
We check the panel at the estimate. If the building cannot run our grinders, we bring a generator.
Yes. Shops and equipment bays are a good fit for a quartz or flake system with a chemical-resistant topcoat.
Yes, Somis (93066) is inside our service area.
The range reflects how many layers go into the floor. A standard 3-layer flake system starts at $6.50 per sq ft ($2,600 for a typical two-car garage). Adding a second topcoat (4 layers) or a dedicated clear moisture barrier plus a final coat (5 layers) adds material and labor, which moves the price up to $10 per sq ft ($4,000 for a two-car garage). You pick the build; the low end is a complete floor, not a teaser price.
Yes. The layer count sets the starting price, but site conditions also count. A 3-layer or 4-layer flake floor can reach about $4,000 when the job needs extra work such as removing an existing coating, glue or adhesive removal, advanced crack repair, demolition of an existing floor, moisture mitigation, or extra labor and prep. We confirm what your slab needs at the free on-site estimate.
Free on-site estimate anywhere in Thousand Oaks and the Conejo Valley.
