A full-broadcast flake floor hides dust and tire marks, adds grip, and is the most popular garage finish in Thousand Oaks.
Free On-Site Estimate
A full-broadcast flake floor hides dust and tire marks, adds grip, and is the most popular garage finish in Thousand Oaks. Installed price: $6.50–$10 per sq ft; typical two-car garage $2,600–$4,000; install time 1 day.
Vinyl color chips are broadcast to rejection into a pigmented epoxy basecoat, scraped, and sealed under a UV-stable polyaspartic topcoat. The texture gives grip, the pattern hides dust and patched cracks, and the whole system goes in in one day.
Best for: garages, laundry rooms, workshops, entry stairs and pool decks. Pick a blend on our color chart.
| System | Per sq ft | Typical 2-car garage | Install time |
|---|---|---|---|
| Flake epoxy | $6.50–$10 per sq ft | $2,600–$4,000 | 1 day |
Every flake floor we install starts with diamond grinding and the same core layers; the three builds below differ in what is added on top.
A flake epoxy garage floor in Thousand Oaks costs $6.50–$10 per sq ft, or $2,600–$4,000 for a typical two-car garage (up to 400 sq ft). A 3-layer system sits at the low end, a 4-layer double-topcoat build in the middle, and a 5-layer system with its own moisture barrier at the top.
From $6.50 per sq ft
Typical two-car garage: From $2,600
Low end of the range
Best for: Most everyday garages; installed in one day, walkable that evening.
$6.50–$10 per sq ft, mid-range
Typical two-car garage: Between $2,600 and $4,000
Middle of the range
Best for: Owners who want a smoother surface, a specific sheen, or extra grip.
Up to $10 per sq ft
Typical two-car garage: Up to $4,000
Top of the range
Best for: Slabs with moisture concerns and owners who want the thickest, most protected build.
Your price is not set by layers alone: a 3- or 4-layer build can still land near $4,000 when the slab needs extra work first. We confirm what applies at the free on-site estimate.
The spread is not a sales trick: every tier is a complete, diamond-ground floor. What changes is how many coats go down and what each coat does, so the $2,600 floor is a real finished system, and on an otherwise ready slab the $4,000 floor buys extra layers, not a markup.
Final price depends on measured square footage and slab condition; confirmed at your free on-site estimate.
The range reflects how many layers go into the floor. A standard 3-layer flake system starts at $6.50 per sq ft ($2,600 for a typical two-car garage). Adding a second topcoat (4 layers) or a dedicated clear moisture barrier plus a final coat (5 layers) adds material and labor, which moves the price up to $10 per sq ft ($4,000 for a two-car garage). You pick the build; the low end is a complete floor, not a teaser price.
Yes. The layer count sets the starting price, but site conditions also count. A 3-layer or 4-layer flake floor can reach about $4,000 when the job needs extra work such as removing an existing coating, glue or adhesive removal, advanced crack repair, demolition of an existing floor, moisture mitigation, or extra labor and prep. We confirm what your slab needs at the free on-site estimate.
Most two-car garages are finished in one working day. Walk on it that evening and park after 48–72 hours.
No. The broadcast chips give a light texture; we can add extra grip to the topcoat for wet areas.
$6.50–$10 per square foot installed; a typical two-car garage is $2,600–$4,000.
Available throughout Thousand Oaks and in:
Free on-site estimate anywhere in Thousand Oaks and the Conejo Valley.
