Epoxy flooring in Agoura Hills (91301) costs $6.50–$18.50 per sq ft installed depending on the system. A two-car flake garage is $2,600–$4,000 and takes one day. Detached shops and barns in Old Agoura are priced per sq ft; prep like coating removal, deep crack repair or demo is quoted separately.
Agoura Hills is the next city east on the 101, roughly 6 miles from our office. Typical drive from our office at 3075 E Thousand Oaks Blvd #1100: 10–15 minutes. Call (805) 521-6591 for a free on-site estimate.
Agoura Hills has two very different kinds of floors. Morrison Ranch, Liberty Canyon and the neighborhoods off Kanan Road are mostly 1970s and 80s tract homes with ordinary attached garages. Old Agoura, south of the 101 around Cornell Road, is horse property: detached garages, barns, tack rooms and workshops, sometimes with slabs that were poured in sections over the years and do not quite line up.
Summers in the canyon between Ladyface Mountain and the Santa Monica Mountains get hot. That is where cheap one-coat kits fail: a tire that just came off the 101 at highway temperature softens a weak coating and pulls it up. We diamond-grind every slab and finish with a polyaspartic topcoat rated for hot tires.
For outbuildings, power can be the hidden issue. Our grinders need real amperage. We check the panel at the estimate and plan around it.
Agoura Hills ranges from ranch-style properties in Old Agoura with detached garages and barns to 1970s–80s tract homes in Morrison Ranch and Liberty Canyon.
Inland canyon heat is common in summer, so hot-tire pickup is a real risk on cheap one-coat kits; we diamond-grind and use a polyaspartic topcoat rated for hot tires.
| System | Per sq ft | Typical 2-car garage | Install time |
|---|---|---|---|
| Flake epoxy | $6.50–$10 per sq ft | $2,600–$4,000 | 1 day |
| Solid color epoxy | $9.50–$11.50 per sq ft | $3,800–$4,600 | 3 days |
| Metallic epoxy | $12.50–$18.50 per sq ft | $5,000–$7,400 | 3–4 days |
| Quartz & sand finish | $9–$16.50 per sq ft | $3,600–$6,600 | 2–3 days |
| Grind and seal | $6.50–$9 per sq ft | $2,600–$3,600 | 1–2 days |
| Patio, driveway & pool deck coating | $8–$12 per sq ft | $3,200–$4,800 | 1–2 days |
| Garage size | Approx. area | Flake, installed |
|---|---|---|
| 1-car | 250 sq ft | $2,600–$2,600 |
| 2-car | 400 sq ft | $2,600–$4,000 |
| 2.5-car | 500 sq ft | $3,250–$5,000 |
| 3-car | 650 sq ft | $4,225–$6,500 |
Flake at $6.50–$10 per sq ft with the $2,600 project minimum. Extra prep (coating or glue removal, advanced crack repair, demo, moisture mitigation, extra labor) is added after we see the slab.
Whether it is a tract-home garage in Morrison Ranch or a detached shop in Old Agoura, the price follows the number of layers. Here is the breakdown.
A flake epoxy garage floor in Agoura Hills costs $6.50–$10 per sq ft, or $2,600–$4,000 for a typical two-car garage (up to 400 sq ft). A 3-layer system sits at the low end, a 4-layer double-topcoat build in the middle, and a 5-layer system with its own moisture barrier at the top.
From $6.50 per sq ft
Typical two-car garage: From $2,600
Low end of the range
Best for: Most everyday garages; installed in one day, walkable that evening.
$6.50–$10 per sq ft, mid-range
Typical two-car garage: Between $2,600 and $4,000
Middle of the range
Best for: Owners who want a smoother surface, a specific sheen, or extra grip.
Up to $10 per sq ft
Typical two-car garage: Up to $4,000
Top of the range
Best for: Slabs with moisture concerns and owners who want the thickest, most protected build.
Yes, a 3- or 4-layer floor in Agoura Hills can approach $4,000; what drives it is the prep your slab needs. We confirm what applies at the free on-site estimate.
The spread is not a sales trick: every tier is a complete, diamond-ground floor. What changes is how many coats go down and what each coat does, so the $2,600 floor is a real finished system, and on an otherwise ready slab the $4,000 floor buys extra layers, not a markup.
Final price depends on measured square footage and slab condition; confirmed at your free on-site estimate.
Barns and tack rooms do best with quartz or flake plus coarse grit (30 or 80) because hooves, boots and water all meet on that floor. A standard garage: 3- or 4-layer flake.
About 6 miles east on the 101, 10–15 minutes from our office. Barn and shop jobs larger than a garage may take a second day.
Before you get quotes, these may help: 2026 epoxy garage floor price guide · epoxy vs polyaspartic · 10 questions to ask an installer.
| Neighborhood | Zip | What we usually find |
|---|---|---|
| Morrison Ranch | 91301 | 1970s–80s attached garages |
| Liberty Canyon | 91301 | Tract homes near the 101; standard 2-car |
| Old Agoura | 91301 | Barns, detached garages, uneven slabs |
| Ladyface / Agoura Rd area | 91301 | Townhomes and smaller garages |
| Hillrise / Lake Lindero | 91301 | Hillside homes, sloped driveways |
Plus every other street in 91301. No travel charge.
Epoxy flooring in Agoura Hills (91301) costs $6.50–$18.50 per sq ft installed depending on the system. A two-car flake garage is $2,600–$4,000 and takes one day. Detached shops and barns in Old Agoura are priced per sq ft; prep like coating removal, deep crack repair or demo is quoted separately.
Yes. A quartz or flake broadcast with a coarse grit in the topcoat gives traction for boots and is easy to hose down. Uneven sectioned slabs need extra grinding and patching, which is priced as prep.
Mostly hot tire pickup and poor prep. Hot tires soften thin one-part coatings, and acid-etched slabs do not give a strong bond. A diamond-ground slab with a polyaspartic topcoat avoids both.
You can walk on a flake floor the same evening and park after 48–72 hours. In very hot weather the cure is on the faster side.
Yes. Detached garages, barns and workshops are coated the same way as attached garages; we bring our own power if the building has limited circuits, after confirming on the estimate.
About 6 miles, roughly 10–15 minutes from our Thousand Oaks office depending on 101 traffic.
The range reflects how many layers go into the floor. A standard 3-layer flake system starts at $6.50 per sq ft ($2,600 for a typical two-car garage). Adding a second topcoat (4 layers) or a dedicated clear moisture barrier plus a final coat (5 layers) adds material and labor, which moves the price up to $10 per sq ft ($4,000 for a two-car garage). You pick the build; the low end is a complete floor, not a teaser price.
Yes. The layer count sets the starting price, but site conditions also count. A 3-layer or 4-layer flake floor can reach about $4,000 when the job needs extra work such as removing an existing coating, glue or adhesive removal, advanced crack repair, demolition of an existing floor, moisture mitigation, or extra labor and prep. We confirm what your slab needs at the free on-site estimate.
Free on-site estimate anywhere in Thousand Oaks and the Conejo Valley.
