A Calabasas epoxy garage floor costs $2,600–$4,000 for two-car flake, $3,800–$4,600 for high-gloss solid color, and $5,000–$7,400 for metallic. Showroom finishes take 3–4 days. Price also depends on prep: removing old finishes or tile, flawless crack repair, and moisture work all add cost.
Calabasas is east of Agoura Hills on the 101, about 11 miles from our office. Typical drive from our office at 3075 E Thousand Oaks Blvd #1100: 15–20 minutes. Call (805) 521-6591 for a free on-site estimate.
For a showroom garage, metallic in grays or a high-gloss white/light-gray solid. If the garage is also daily parking for two cars, a 4-layer flake with a urethane gloss topcoat gives a polished look that hides dust much better.
About 15–20 minutes east on the 101. Metallic and solid jobs need 3–4 consecutive working days inside HOA hours.
Before you get quotes, these may help: 2026 epoxy garage floor price guide · epoxy vs polyaspartic · 10 questions to ask an installer.
| System | Per sq ft | Typical 2-car garage | Install time |
|---|---|---|---|
| Flake epoxy | $6.50–$10 per sq ft | $2,600–$4,000 | 1 day |
| Solid color epoxy | $9.50–$11.50 per sq ft | $3,800–$4,600 | 3 days |
| Metallic epoxy | $12.50–$18.50 per sq ft | $5,000–$7,400 | 3–4 days |
| Quartz & sand finish | $9–$16.50 per sq ft | $3,600–$6,600 | 2–3 days |
| Grind and seal | $6.50–$9 per sq ft | $2,600–$3,600 | 1–2 days |
| Patio, driveway & pool deck coating | $8–$12 per sq ft | $3,200–$4,800 | 1–2 days |
| Garage size | Approx. area | Flake, installed |
|---|---|---|
| 1-car | 250 sq ft | $2,600–$2,600 |
| 2-car | 400 sq ft | $2,600–$4,000 |
| 2.5-car | 500 sq ft | $3,250–$5,000 |
| 3-car | 650 sq ft | $4,225–$6,500 |
Flake at $6.50–$10 per sq ft with the $2,600 project minimum. Extra prep (coating or glue removal, advanced crack repair, demo, moisture mitigation, extra labor) is added after we see the slab.
Calabasas garages are often finished spaces. In Calabasas Park, Mont Calabasas and the Oaks, it is common to see cabinets, lighting and car lifts, and owners asking for a floor that looks like a dealership. That is metallic or high-gloss solid color territory, and it is less forgiving than flake: any crack that is not repaired properly will telegraph through a glossy finish, so prep time goes up.
Nearly every community here is gated with an HOA that sets work hours and requires contractor registration. We register the crew and get the gate pass sorted before the first day, because a metallic floor spread over three or four days cannot afford a morning lost at the gate.
Inland heat in summer, plus very bright sun on driveways around Calabasas Road and Las Virgenes, means outdoor work gets a UV-stable topcoat and an early start.
Calabasas homes in gated communities such as Calabasas Park and Mont Calabasas often have large garages finished as showrooms, so metallic and high-gloss solid floors are common requests.
Many Calabasas communities have HOA work-hour rules and gate access procedures; we schedule around them and coordinate gate passes in advance.
Calabasas showroom-style garages often call for a smoother, higher-sheen finish, which is what the extra layers add. See the tiers:
A flake epoxy garage floor in Calabasas costs $6.50–$10 per sq ft, or $2,600–$4,000 for a typical two-car garage (up to 400 sq ft). A 3-layer system sits at the low end, a 4-layer double-topcoat build in the middle, and a 5-layer system with its own moisture barrier at the top.
From $6.50 per sq ft
Typical two-car garage: From $2,600
Low end of the range
Best for: Most everyday garages; installed in one day, walkable that evening.
$6.50–$10 per sq ft, mid-range
Typical two-car garage: Between $2,600 and $4,000
Middle of the range
Best for: Owners who want a smoother surface, a specific sheen, or extra grip.
Up to $10 per sq ft
Typical two-car garage: Up to $4,000
Top of the range
Best for: Slabs with moisture concerns and owners who want the thickest, most protected build.
Calabasas projects can reach about $4,000 on a 3- or 4-layer system because the slab's condition is priced in, not just the layers. We confirm what applies at the free on-site estimate.
The spread is not a sales trick: every tier is a complete, diamond-ground floor. What changes is how many coats go down and what each coat does, so the $2,600 floor is a real finished system, and on an otherwise ready slab the $4,000 floor buys extra layers, not a markup.
Final price depends on measured square footage and slab condition; confirmed at your free on-site estimate.
| Neighborhood | Zip | What we usually find |
|---|---|---|
| Calabasas Park | 91302 | Gated; showroom and car-collector garages |
| Mont Calabasas | 91302 | Large multi-car garages |
| Saratoga Hills | 91302 | 1970s–80s homes; older slabs |
| Calabasas Highlands | 91302 | Rural lots, detached structures |
| Old Town / Calabasas Rd | 91302 | Retail and office floors |
Plus every other street in 91302. No travel charge.
A Calabasas epoxy garage floor costs $2,600–$4,000 for two-car flake, $3,800–$4,600 for high-gloss solid color, and $5,000–$7,400 for metallic. Showroom finishes take 3–4 days. Price also depends on prep: removing old finishes or tile, flawless crack repair, and moisture work all add cost.
Three to four working days, because each layer needs to cure before the next goes on. We plan the schedule around your community work hours.
They can if they are only surface-filled. For glossy metallic and solid floors we route, fill and grind cracks flush. Advanced crack repair is priced as extra prep.
Yes. We coat around anchored lift posts and detail the edges. If the lift can be unbolted, coating under the base gives a cleaner result.
Yes. Send us the gate or HOA contractor requirements and we will register the crew and follow the community work hours.
Metallic and high-gloss solid color floors are most requested for showroom-style garages; flake remains the most practical for everyday parking.
The range reflects how many layers go into the floor. A standard 3-layer flake system starts at $6.50 per sq ft ($2,600 for a typical two-car garage). Adding a second topcoat (4 layers) or a dedicated clear moisture barrier plus a final coat (5 layers) adds material and labor, which moves the price up to $10 per sq ft ($4,000 for a two-car garage). You pick the build; the low end is a complete floor, not a teaser price.
Yes. The layer count sets the starting price, but site conditions also count. A 3-layer or 4-layer flake floor can reach about $4,000 when the job needs extra work such as removing an existing coating, glue or adhesive removal, advanced crack repair, demolition of an existing floor, moisture mitigation, or extra labor and prep. We confirm what your slab needs at the free on-site estimate.
Free on-site estimate anywhere in Thousand Oaks and the Conejo Valley.
